24LC64T-E/SN

Las imágenes son solo para referencia

24LC64T-E/SN

IC EEPROM 64KBIT I2C 8SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat EEPROM
Technology EEPROM
MemorySize 64Kb (8K x 8)
MemoryInterface I²C
ClockFrequency 400 kHz
WriteCycleTime-WordPage 5ms
AccessTime 900 ns
Voltage-Supply 2.5V ~ 5.5V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Descripción general

Description

The 24LC64T-E/SN is a 64 Kbit (8 Kbyte) EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. It utilizes the I2C (Inter-Integrated Circuit) communication protocol, allowing multiple devices to be connected on the same bus. This EEPROM is designed for applications requiring moderate data storage with non-volatile memory, retaining data even when power is lost.
Key features of the 24LC64T-E/SN include a wide operating voltage range (typically 1.7V to 5.5V), fast access times (up to 400 kHz I2C speed), and a built-in page write capability, which allows writing data in blocks for efficiency. The device supports up to 1 million write cycles and has a data retention period of over 200 years, making it reliable for long-term storage.
It is commonly used in various applications, including consumer electronics, automotive systems, and industrial controls, where data integrity is critical. The "T" designation indicates that it is a "compatible" part, and "E/SN" refers to its specific packaging and temperature ratings.

Features

The 24LC64T-E/SN is a 64 Kbit (8 Kbyte) I2C EEPROM designed for low-power applications. Key features include:
- Memory Organization: 8 pages of 64 bytes each, with a write cycle time of 5 ms (typical).
- I2C Interface: Supports standard and fast modes (up to 400 kHz), enabling easy integration into microcontroller systems.
- Voltage Range: Operates on a supply voltage of 1.8V to 5.5V, making it suitable for battery-powered devices.
- Data Retention: Guaranteed data retention for 100 years at 25°C, with EEPROM endurance of 1 million write cycles.
- Write Protection: Features a write protection capability via hardware and software methods.
- Low Power Consumption: Consumes low power during active and standby modes, ideal for energy-efficient designs.
- Temperature Range: Available in industrial temperature ranges of -40°C to +85°C.
These features make the 24LC64T-E/SN suitable for applications such as data storage, configuration settings, and calibration data in various electronics.

Package

The 24LC64T-E/SN is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) format. This package type is surface-mount and suitable for compact electronic applications.

Pinout

The 24LC64T-E/SN is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device with a pin count of 8.
Pin Functions:
1. VCC (Pin 1): Power supply voltage (typically +2.5V to +5.5V).
2. GND (Pin 2): Ground reference.
3. SDA (Pin 3): Serial Data Line, used for data input and output.
4. SCL (Pin 4): Serial Clock Line, used to synchronize data transfer.
5. WP (Pin 5): Write Protect; when connected to VCC, write operations are disabled.
6. A0 (Pin 6): Chip Select, allows multiple devices on the same bus.
7. A1 (Pin 7): Chip Select, also for address selection in multiple device configurations.
8. A2 (Pin 8): Chip Select, further address selection for interfacing multiple devices.
This device is used for non-volatile data storage in various applications.

Manufacturer

The manufacturer of the 24LC64T-E/SN is Microchip Technology Inc. Microchip is a leading American semiconductor company that specializes in microcontroller and analog semiconductors. Founded in 1989, the company focuses on providing a wide range of solutions for embedded systems, including memory components, microcontrollers, digital signal controllers, and development tools. Microchip serves various industries such as automotive, industrial, consumer electronics, and communications. The 24LC64T-E/SN is a 64 Kbit EEPROM (Electrically Erasable Programmable Read-Only Memory) device, commonly used for data storage in applications requiring non-volatile memory.

Application

The 24LC64T-E/SN is a 64K-bit EEPROM that finds application in various areas such as consumer electronics, automotive systems, and industrial automation. It is commonly used for data storage in devices like smart meters, medical equipment, and communication systems. Its features make it suitable for applications requiring non-volatile memory for configuration settings, calibration data, and user preferences. Additionally, it is utilized in networking equipment and RFID systems for data retention and management.

Equivalent

The 24LC64T-E/SN chip is a 64K I2C EEPROM. Equivalent products include:
1. AT24C64 - Atmel
2. 24C64 - Microchip
3. M24C64 - STMicroelectronics
4. LTC 24LC64 - Littelfuse
These chips offer similar functionality and specifications, but always check datasheets for specific compatibility.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria