24LC02BT-E/SN

Las imágenes son solo para referencia

24LC02BT-E/SN

IC EEPROM 2KBIT I2C 400KHZ 8SOIC

100% original & Nuevo

24 horas listos para el envío

Garantía de 365 días

RFQ y Obtenga más descuentos

Especificaciones

Part Status Active
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format EEPROM
Technology EEPROM
Memory Size 2Kbit
Memory Organization 256 x 8
Memory Interface I2C
Clock Frequency 400 kHz
Write Cycle Time - Word, Page 5ms
Access Time 900 ns
Voltage - Supply 2.5V ~ 5.5V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC
Base Product Number 24LC02

Descripción general

Description

The 24LC02BT-E/SN is a 2K-bit I²C EEPROM (Electrically Erasable Programmable Read-Only Memory) chip produced by Microchip Technology. It features a 256 x 8-bit memory organization and operates on a supply voltage range of 1.8V to 5.5V, making it suitable for low-power applications.
The device utilizes I²C (Inter-Integrated Circuit) protocol for communication, allowing up to eight devices to be connected on a single bus, with unique addresses for each. Its write cycle time is typically 5 ms, and it supports page write operations, enhancing data transfer efficiency.
The 24LC02BT-E/SN is ideal for applications requiring non-volatile data storage, such as consumer electronics, automotive, and industrial systems. It is offered in various package types, including SOIC and TSSOP, facilitating easy integration into different circuit designs.
With built-in write protection features and the ability to retain data for over 100 years, this EEPROM is a reliable choice for storing configuration settings, calibration data, and small data logs.

Features

The 24LC02BT-E/SN is a 2-kilobit (256 x 8-bit) EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. Key features include:
1. I2C Interface: It supports standard I2C communication, allowing multiple devices to be connected on the same bus.
2. Wide Voltage Range: Operates from 1.8V to 5.5V, making it suitable for various applications.
3. Fast Access Time: Offers low power consumption with fast access time (up to 1 ms typical for read/write operations).
4. Page Write Capability: Supports 8-byte page write, enabling efficient data storage.
5. Endurance: Capable of at least 1,000,000 write cycles and data retention of 100 years.
6. Low Power Consumption: Consumes low power during active and standby modes.
7. 8-Lead SOIC Package: Available in a compact surface-mount package, suitable for space-constrained designs.
These features make the 24LC02BT-E/SN ideal for applications in consumer electronics, automotive, and industrial systems requiring reliable, non-volatile memory.

Package

The 24LC02BT-E/SN is available in an 8-pin SOIC (Small Outline Integrated Circuit) package. This package type is designed for surface mounting and is commonly used in applications requiring EEPROM memory.

Pinout

The 24LC02BT-E/SN is a 2K-bit I2C EEPROM with a total of 8 pins. Here are the pin functions:
1. VCC (Pin 1): Power supply pin, typically 2.5V to 5.5V.
2. GND (Pin 2): Ground reference.
3. SDA (Pin 3): Serial Data Line; used for data transfer.
4. SCL (Pin 4): Serial Clock Line; used to synchronize data transfer.
5. WP (Pin 5): Write Protect; when connected to VCC, write operations are disabled.
6. NC (Pin 6): No Connect; not used, can be left unconnected.
7. A0 (Pin 7): Address pin; used to set the device address for multiple devices on the bus.
8. A1 (Pin 8): Address pin; similar to A0 for additional addressing configurations.
The 24LC02BT-E/SN supports I2C communication and is used for non-volatile data storage in various applications.

Manufacturer

The manufacturer of the 24LC02BT-E/SN is Microchip Technology Inc. Microchip is a leading semiconductor company that specializes in providing microcontroller, mixed-signal, analog, and Flash-IP solutions. Founded in 1989 and headquartered in Chandler, Arizona, Microchip primarily serves various industries such as automotive, industrial, consumer electronics, and communications. The company is known for its commitment to innovation and quality, offering a wide range of products including memory devices, microcontrollers, and development tools. Its focus on low-power, high-performance solutions makes it a key player in the embedded systems market.

Application

The 24LC02BT-E/SN is a 2-kilobit EEPROM used in various applications, including consumer electronics, industrial automation, and automotive systems. It is ideal for data storage in devices like microcontrollers, smart meters, and sensors, enabling configuration data, calibration settings, and user preferences to be retained even when power is lost. Its I2C interface simplifies connections in space-constrained environments, making it suitable for portable and compact devices.

Equivalent

The 24LC02BT-E/SN chip is a 2Kb I2C EEPROM. Equivalent products include the AT24C02, M24C02, and 93C56. Make sure to check the specific electrical characteristics and package type to ensure compatibility for your application.

Envío

Métodos de envíoNosotros

ofrecer servicios de envío globales a través de DHL, FedEx, TNT, UPS, o cualquier otro expediente de su elección.


Referencia de tarifas de envío (DHL/FedEx):

DHL: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 2-5 días hábiles.

FedEx: El costo de envío oscila entre $25-$40 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

UPS: El costo de envío oscila entre $25-$45 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

TNT: El costo de envío oscila entre $25-$65 (0.5kg), con un tiempo de entrega estimado de 3-7 días hábiles.

EMS: El costo de envío oscila entre $30-$50 (0.5kg), con un plazo de entrega estimado de 7-15 días hábiles.

Correo aéreo registrado: El costo de envío es de $2-$4 (0.1kg), con un tiempo de entrega estimado de 5-20 días hábiles.

Pagos

Payment Methods

El plazo de pago es 100% prepagado.

Actualmente, solo aceptamos los siguientes métodos de pago:

1. de PayPal

2. Tarjeta de crédito/débito

3. Transferencia bancaria